AL-KO Motorhome Support Legs ClickFix
Stable and lightweight support legs for motorhomes that work on all surfaces. With AL-KO ClickFix support legs, you avoid rocking and potential noise in the suspension and parking brake when someone walks in the motorhome or turns in bed. Fits all AL-KO AMC chassis and is easy to install on most other chassis as well (requires drilling holes for mounting).
First, measure the frame height with loaded car A (measurement between ground level and top of frame). Choose a support leg that fits that height.
Capacity: Static 1000 kg, Dynamic 500 kg
Weight: 7.2 - 8.9 kg
Safe and lightweight motorhome support legs
Motorhome support legs for mounting at the rear of motorhomes with AL-KO AMC chassis. Can also be mounted on other frames but requires drilling holes and may also require reinforcement. The support legs are easily cranked up and down manually (Note: Crank not included in delivery). In the end position, the crank is turned upwards and snaps automatically so that you can be sure that they are not accidentally folded down during driving. The ClickFix support legs also have an integrated safety mechanism that allows departure even though the support legs are extended, so if you forget it, damage to both the support legs and the motorhome is avoided.
- Provides good support regardless of whether the surface is grass, gravel or asphalt!
- Comfortable and fast - after just half a turn, the legs fall vertically down and start pushing out.
- Safety mechanism - the legs automatically fold up if forgotten when departing
- Trouble-free mounting on AL-KO frames or frame extensions
- Lightweight
- Load capacity, static 1000 kg/dynamic 500 kg
- NOTE: The support legs must not be used as a jack.
- NOTE: Crank handle not included
A - Suspension range loaded vehicle (Model name) | B - Regulation height | C - Length | Weight |
---|---|---|---|
320-440 mm | 297-464 mm. | 382 mm | 7.2 kg |
420-646 mm | 397-654 mm | 481 mm | 7.3 kg |
460-710 mm | 446-744 mm | 531 mm | 8.4 kg |
Installation
The support legs fit all AMC chassis and frame extensions manufactured from August 1995 and are equipped with pre-drilled holes, which makes installation very easy. Two screws per with a half-image at c/c 60mm. On some motorhomes, it may be helpful to drill holes in the skirt to make it easier to access the support leg crank.
Brand | AL-KO |